Calitek offers a system horticultural lighting revolutionary and innovative : the MHC 630W GROWTH 4000 K LINKABLE
The ballast, the reflector and thebulb are brought together in a single module for optimizing the quality of the material and ease of installation is incomparable.
Special flowering and growth
Customer ratings and reviews
This product is no longer in stock
Attention : last pieces available !
Calitek offers a system horticultural lighting revolutionary and innovative !
The ballast and the reflector are combined into a single module for optimizing the quality of the material and ease of installation is incomparable.
The system horticultural lighting CALITEK CK-1000 is a device to control the digital controlled by software that has been designed to give growers the most selective versatility and performance lighting for the plants.
This design can run a lamp at rated power and is composed of a controller, four phases to adjust the output of the ballast to 600W, 630W, 750W, 945W, 1000W or Super By, which will increase the brightness of 15%. Make sure you run your lamp continuously at 100% for 10 minutes before moving to other settings. The quick-switch settings may damage the lamp.
This revolutionary feature, unique to our products, makes the ballast a digital CALITEK the ballast the safest and most reliable when it is used in automated applications with multiple lamp. When multiple units are connected to the same circuit segment, our integrated software control of ignition will balance completely the draw power by lighting a lamp at the same time to prevent electrical surges and spikes that can overload the circuit area and the systems cut-off trigger circuit. For efficiency, this feature is enabled in conjunction with our "Soft Start Technology".
Technology Soft Start extends the life of the lamp by stopping the race of the current to the lamp and preventing the overload of the lamp. When the ballast starts from cold, there will be a delay of 3 seconds before the ignition. After ignition, there will be a series of delays, on a random 0-2 seconds before full brightness is reached after approximately 3 to 5 minutes. The technology soft-start is also enabled when you increase and decrease the power of the lamp using the function ‘Smart-Step’.
The digital ballasts CALITEK is suitable for use with all lamps Double-Ended to high-pressure sodium (HPS), and Double Ended metal halide (MH), and Double-Ended CMH of good quality. For a perfect combination of guaranteed and best results, we recommend the lamps horticultural CALITEK. The lamps CALITEK are optimized to be used with electronic ballasts, high-efficiency with an adjustable output.
600W : Suitable for HPS bulbs or MH / 630W : Suitable for light bulbs MHC 630W, HPS or MH / 750W : Suitable for HPS bulbs or MH / 945W : Suitable for light bulbs MHC 945W, HPS or MH / 1000W : Suitable for HPS bulbs or MH / SUPER BY : only Suitable for light bulbs HPS or MH
Attention it is imperative to use light bulbs MH or HPS with a power of 1000W.
Also, for the bulbs MHC, it is imperative to place the dimmer on the power of your bulb, 630W or 945W.
The case design CALITEK acts as a heat sink top making the ballast extremely cool running without the need for internal fans.
The digital ballasts CALITEK uses a sophisticated system of control circuit controlled by a system that is not seen in the ballasts of other manufacturers. The system protects against a range of defects, including: protection against open-circuit, protection short-circuit protection, overvoltage protection, under voltage and protection against overheating. On the ignition, the ballast performs a test of 3 seconds in the circuit, and, in case of failure, the ballast will enter protection mode to prevent damage to the ballast and the lamp.
The digital ballasts CALITEK is up to 30% more efficient than the magnetic ballast standard, producing more lumens of light per watt of energy consumed. The efficiency does not decrease and is maintained for the entire life of the unit.
The digital ballasts CALITEK has no internal fans loud and is totally silent in operation.
Model : CK-1000
Lamp : 1000W HPS/MH
Input power : 1000W
Input voltage : 240V, 50/60Hz
Current input : 4.4 A / 240V
Intensity of appeal : 60 A / 220Vac
Maximum output power : 1150W
Leakage current : 0.5 mA max to 180-300Vac
THD : < 10%, 60Hz
Power factor : >0,99 (>0,99 max >0,95)
Input voltage range : 100-265Vac
Ambient temperature : -45°C to 80°C
Unit weight : 6.4 Kg
Unit Dimension : 64.4 x 37.3 x 10.5 cm
Detection of failure of bulb : YES
Ignition time : 3-10 seconds
Input frequency : 47 / 63 Hz
Protections : open-Circuit / Short-circuit / Overvoltage / undervoltage / Overheating
Isolation voltage : Input/Gnd 1600Vac - 5mA 1Min
Insulation resistance : Input/Gnd 50MΩ - 500Vdc, 1Min,
Dimmer : 600/630/750/945/1000/SUPER BY
Open circuit voltage : < 300V
Ignition voltage : 3-5 KV
Output frequency : > 100 KHz
Lamp power : CONSTANT
RF interference : NO
Operating temperature : 0°C to +30°C
Storage temperature : -45°C to +80°C
Operating humidity : 20 to 95%
Storage humidity : 10 to 95%
Environment IP : IP20
Ballast warranty : 2 years